Description
CEM’s Polyure WBU-400 is a 2-Component, High Solids Waterborne Polyester Polyurethane sealer used as a hard, durable protective or maintenance wear surface over decorative concrete, pavers, concrete stains, etc. with heavy foot traffic exposure. Developed for interior or exterior wear surfaces in residential & commercial installations to protect against long-term chalking in high U.V. exposure environments & for greater film thickness capabilities, better gloss retention, better chemical & stain resistance versus traditional 2-Component water-based Polyurethanes. Available in Semi-Gloss & Low Sheen finishes.
CEM’s Polyure WBU-400 achieves a wet-look to boost color & depth of stains. Yields an easy to clean, hard film finish with good Ultraviolet Light Stability, Abrasion Stain & Hot Tire Pick-up Resistance, Adhesion, Gloss Retention, easy to clean, as well as less odor versus traditional solvent-based Polyurethane sealers.
RECOMMENDED AS A FINAL TOPCOAT FOR:
- Commercial & Residential:
- Decorative & Stamped Concrete
- Concrete Countertops
- Terrazzo
- Garage Floor Coatings
- Mechanical Rooms
- Sealer for Vinyl Chip resinous coating systems
- Clean Rooms
- Pavers
HIGHLIGHTS:
- Good Pot-life – 2 hours at 75°F / 50% Humidity
- V. Stable
- Stain & Chemical Resistant
- More Durable than traditional solvent based Acrylic Sealers
- Easy to Clean & Maintain
- Wet Look – Enhances Colors
- Hot Tire Pickup Resistant
- Low VOC’s – Meets Source Specific Standards Rule 1113 established by AQMD in California
STORAGE:
Indoors between 50°F (10°C) to 100°F (38°C)
INSTALLATION TEMPERATURE RANGE:
55°F (12.7°C) to 100°F (38°C) with up 80% Humidity
SHELF LIFE:
24 Months (original, unopened containers); 30 days (once opened)
AVAILABLE KIT SIZES:
Gloss:
1.5 Gallon kit
15 Gallon kit
Low Sheen:
1.5 Gallon kit
15 Gallon kit
COLOR:
Clear; *For Solid Colors – Tint with CEM Color Packs (Sold Separately)