Description
The Original-Paver Boss GL Pro SBC-25 Clear Gloss Formula, 5 Gallon Option
Paver Boss GL Pro SBC-25 is our Professional Grade Paver Sealer, a pure acrylic, solvent-based sealer that adds a long-lasting gloss to cured concrete. Excellent for all types of decorative paver systems. With a 25% solids content and gloss finish, this hard-working sealer will get the job done,
Remenber Gloss is Boss!
Paver Boss GL Pro SBC-25 is a tough pure acrylic concrete sealer in a solvent base. It is designed to protect and beautify all types of concrete with a high gloss durable clear coating. Paver Boss GL Pro SBC-25 is non-yellowing to preserve the appearance of all types of decorative concrete as well.
Paver Boss GL Pro SBC-25/30 is formulated as follows:
FEDERAL <700 VOC Compliant: available in 30% and 25%.
<600 VOC Compliant: Available in 25/30% solids.
PREPARATION
Clean dirt, wax, grease, oil and other contaminants from the surface. Be sure to remove any foreign coating unless previous coating is same or similar solvent-based sealer. Make sure the surface is clean, dry and sound. Clean oily concrete with Citri Boss CLEANER DEGREASER, NEUTRALIZER.
Use a bristle brush for heavily oiled spots. If surface is slick, etch and Rinse well with a pressure
washer. Allow 24 hours to dry. Apply only when surface and air temperatures are above 50° F and below 90° F. Do not apply to excessively to hot surfaces as rapid drying may cause bubbles to form, sweep away any loose sand.
APPLICATION
Brush may be used where roller won’t reach. Do not pour directly from can to concrete. Apply evenly from can or other metal container with appropriate roller. Use a long nap roller for exposed aggregate, a medium nap roller for textured surfaces and a short nap roller for smooth surfaces. Wait until the surface is tack-free before applying a second coat. Apply perpendicular to the first coat. Cross-rolling allows for an even application. If spraying, use a solvent resistant sprayer holding tip no more than 8” from surface during application. Back rolling is recommended while spraying. Clean up immediately with SOLVENT, Xylene or Acetone. Foot traffic should be avoided for 4 hours. Vehicle traffic should be avoided for 48 hours. Cooler temperatures or increased humidity will slow the dry time.
NET COVERAGE RATE
Two thin coats are recommended for net coverage for Pavers: 250 ft² per gallon.
*Dilute for extended coverage.
