The Decorative Concrete Store

Exterior Water Based Acrylic Clear Sealer Super WB


SureCrete Super WB is a water-based clear outdoor sealer for pool decks and patios on both concrete and pavers. Unlike solvent clear acrylic sealer, Super WB can be used in locations where a low VOC. is required.

Product Documents


SureCrete’s Super WB is a 30% solids, water based clear outdoor sealer for pool decks and patios that are low VOC (less than 100 g/L), strong binding, gloss acrylic sealer for any cement based product. This product contains a hybrid, self-cross-linking, acrylic resin with built-in water repellency and tenacious penetration and adhesion. It does not contain wax or silicone additives. The coating is chemical resistant, durable, does not blush, has long solids retention, and is easy to clean. Super WB is non-flammable and environmentally safe perfect for other sealers stone products.

A water-based acrylic sealer is often the product of choice for homeowners looking to seal exterior overlays or freshly poured concrete applications because of its ecologically friendly properties of being lower in VOCs, having less of odor during application and curing, and being less hazardous material to deal with. For contractors, this is often the case as well since its eco-friendly green properties allow SureSeal Super WB to accredit a job site with more LEED points on projects requiring these specifications like concrete and pavers protection. Super WB is also available in a low-luster variety for those looking for a water-based acrylic sealing product without the shine provided by Super WB product paver sealer.

Water-Based Clear Outdoor Sealer – Super WB – Typical applications:
Broom Finish Overlays
Sprayed Texture Coatings
Stamped Overlay Floors
Slop-Trowel Exterior Textures
Non-Solvent Based Sanded Sealer Pavers
pavers product
Sealing Paver Stones
Pool Decks and Patios
Vertical Concrete Overlays
Block Walls and Retention Walls
Driveways and Sidewalks
Concrete Pavers
Pavers product Sealer
Clear Seals Concrete Surfaces
Stone Applied Sealers

How to Apply SureCrete Super WB Water-Based Clear Outdoor Sealer:

Our Acrylic Sealer products are some of the easiest to apply and use:
Any surface that is about to be sealed needs to be completely cured, clean and free of all contaminants, and fully profiled and etched.
Make sure that temperatures will remain between 50 and 90 degrees Fahrenheit and there will be no precipitation in the applied areas for a 24 hour period following application.
Super WB Acrylic Sealer can be applied by roller, airless sprayer or pump-up sprayer. Whatever your application technique, make sure to apply in thin, even coats over your surface.
Two coats are typically suggested with any exterior project receiving an acrylic sealer, with the second coat being applied as soon as first coat is able to be walked on, and is applied in the same manner as the first coat.

Frequently Asked Questions About Super WB:

Question: Can I use just one coat of Super WB?
Answer: Technically yes, however, it is not suggested. For the best results, we highly recommend using two thinly applied coats of Super WB water-based Acrylic Paver Sealer and Concrete Sealer.

Question: Will Super WB survive the freeze/thaw cycles in my area?
Answer: While it is slightly less durable in this regard than our HS Series premium acrylic sealer products, it does still have some moisture-migration-reducing properties.

Question: Can I use another, lower solids content sealer over top of Super WB?
Answer: Yes, in fact, this sealer can be diluted with water and therefor can be applied to a variety of dilution rates once any given coating has finished curing.

Specs and Properties of Super WB:
Coverage Approx 180-200 square foot per gallon, per coat (undiluted)
VOC Rating less than 100 g/L
Solids Content 30%
Shelf Life 1 year in original unopened container
Ready for recoat 24 hours
Light Duty Use 24 hours
Heavy Traffic Ready 72 hours
Appearance (cured) Clear Gloss
Appearance (wet) Clear
Water Resistance Excellent beads water
Mechanical Stability Excellent
Light Stability Excellent
Diluent Water
Odor Solvent
Application Temperature 50 – 90 degrees Fahrenheit

Test Data for Super WB
Blush 4 hr dry / 18 hr Immersion: No Blush
Adhesion Dry Concrete: Excellent, Wet Concrete: Excellent
QUV Accelerated Weather Testing -53: No blistering, No yellowing @ 250 hours
Abrasion Resistance 12.5 grams loss
Block Resistance D-4969: Excellent
Heat Stability @ 120 degrees Fahrenheit D-1849: Excellent
Film Formation @ 40 degrees Fahrenheit Passed
Water Absorption 2.4 grams per cubic meter
Pencil Hardness D-3363: HB-H
Hot Tire Pick-Up Passed (Under extreme circumstances delaminating could occur. All tire manufacturers were not tested. Chemicals used in tire manufacturing may be detrimental to all sealers from vehicular parking.)

Chemical Resistance for Super WB (Testing ASTM D-1308)
Transmission Fluid Resistant
Gasoline Remove Immediately
Formula 409 Resistant
Motor Oil Resistant
Brake Fluid Remove Immediately

Additional information

Weight 45 lbs
Dimensions 12 × 12 × 15 in

1 Gallon, 5 Gallon


Low Luster, Standard Luster

Ask about The Decorative Concrete Club!
Save 10-25% On Qualifying Items

Call Stone Today! (800) 484-2874
We will call you immediately!