Description
Ultra Seal Boss WBCS-30 Professional Clear Medium Gloss Finish
Ultra Seal Boss WBCG-30 is our Original Formula Professional Grade pure acrylic, solvent-based sealer that adds a long-lasting gloss to cured concrete. Excellent for all types of decorative concrete. With a 30% solids content and gloss finish, this hard-working sealer will get the job done. Residential, Light Commercial, Driveways, Walkways, Patios.
Remenber Gloss is Boss!
Ultra Seal Boss WBCS-30 is a tough pure acrylic concrete sealer in a water base. It is designed to protect and beautify all types of concrete with a medium gloss durable clear coating.
Dilution ratio 2 Gallon to a 5 Gallon pail will provide extended coverage.
Ultra Seal Boss WBCS-30 is non-yellowing to preserve the appearance of all types of decorative concrete.
Ultra Seal Boss WBCS-30 is formulated as follows:
PREPARATION
Clean dirt, wax, grease, oil and other contaminants from the surface. Be sure to remove any foreign coating unless previous coating is same or similar solvent-based sealer. Make sure the surface is clean, dry and sound. Clean oily concrete with Citri Boss, cleaner degreaser and neutralizer.
Use a bristle brush for heavily oiled spots. If surface is slick, etch and Rinse well with a pressure
washer. Allow 24 hours to dry. Apply only when surface and air temperatures are above 50° F and below 90° F. Do not apply to excessively hot surfaces as rapid drying may cause bubbles to form. For pavers, sweep away any loose sand.
APPLICATION
Brush may be used where roller won’t reach. Do not pour directly from to concrete. Apply evenly from can or other metal container with appropriate roller. Use a long nap roller for exposed aggregate, a medium nap roller for textured surfaces and a short nap roller for smooth surfaces. Wait until the surface is tack-free before applying a second coat. Apply perpendicular to the first coat. Cross-rolling allows for an even application. If spraying, use a solvent resistant sprayer holding tip no more than 8” from surface during application. Back rolling is recommended while spraying. Clean up immediately with Solvent Boss-XL or Solvent Boss-ACE. Foot traffic should be avoided for 4 hours. Vehicle traffic should be avoided for 48 hours. Cooler temperatures or increased humidity will slow the dry time.
NET COVERAGE RATE
Two thin coats are recommended for net coverage of:
Smooth Troweled: 300 ft² per gallon Textured or Stamped: 250-300 ft² per gallon
Broom Swept: 250 ft² per gallon Exposed Aggregate and Pavers: 350 ft² per gallon
Coverages extend 33% upon dilution ration of 2 Gallon/5 Gallon
