Description
SureCrete’s interior and exterior floor sealer non-slip grip additive, SureGrip is a product that can be added to a sealer or coating as well as broadcasted over the applied surface.
SureCrete’s SureGrip is a premium grade Non-slip additive for interior and exterior sealers or coatings. Sure Grip consistently outperforms other slip resistant additives in durability, due to its inherent crush resistance. The almost spherical shape of SureGrip will also impart a smoother “feel” than most other slip resistant additives. Low density and insolubility characteristics reduce or eliminate settling when blending into all of SureCrete’s sealers. SureGrip is available in both sealer additive and hand-broadcast formulations. SureGrip Additive is available in two different particle sizes, medium and fine. Heavy-Duty = 840 microns or 20 mesh. Regular = 300 microns or 50 mesh. Whether you are a homeowner looking to keep your children or houseguests safe or a professional coatings applicator working on projects that have specified non-skid surfaces, SureGrip offers an extra level of safety that is simple to apply and easy to manipulate to your desired degree of coarseness.
Interior – Exterior Sealer Non Slip Additive SureGrip Typical applications:
High Traffic Residential Living Floor
Heavily Used Kitchen and Bath Floors
Retail Stores and Walkways
Commercial Non-Slip Floors
Home and Commercial Work Garages
Restaurants and Bars
Business Entrance
How Do You Apply SureCrete SureGrip non-skid broadcast and additive?
SureGrip is one of our easiest to use products:
SureGrip is merely broadcast out by hand immediately following sealer application, while the coating is still wet and fresh.
SureGrip Additive and SureGrip Additive HD are mixed into your specified sealer before being applied to the project surface. Then just roll the sealer out usually!
Questions and Answers about Interior – Exterior Sealer Non Slip Additive SureGrip
Question: How much SureGrip should I use?
Answer: It’s entirely up to you and your preference for protection and sheen, but if using the Additive version, we typically suggest no more than 1 quart SureGrip Additive per 5-gallon pail of acrylic sealer.
Question: Which type of SureGrip should I use?
Answer: Again, this is entirely up to your own personal preference.
Specifications and Properties of SureGrip Non-Slip Additive for Floor Sealers:
Coverage 1 quart Additive per 5 gallon pail (varies widely depending substrate and application method)
VOC Rating 0 g/L
Shelf Life 1 year in original unopened container
Appearance Fine white powder
Confidence of Friction for SureGrip Additive HD at 32 oz per 5 gal pail on Steel Troweled (Slick) Concrete with Rubber Soles SureGrip:
Raw Concrete Dry: .60 – .64; Wet: .60 – .62
SureSeal Super 20 Dry: .78 – .84; Wet: .74 – .82
Dry w/HD: .90 – 1.0; Wet w/HD: .96 – .98
SureSeal Super WB Dry: .72 – .78; Wet: .68 – .72
Dry w/HD: .90 – .98; Wet w/HD: .82 – .86
SureSeal Pigmented SB Dry: .92 – .96; Wet: .82 – .86
Dry w/HD: .94 – .96; Wet w/HD: .84 – .88
SureSeal Pigmented WB Dry: .72 – .78; Wet: .68 – .70
Dry w/HD: .90 – 1.0; Wet w/HD: .96 – .98
Dura-Kote Polyurethane SB Dry: .66 – .72; Wet: .76 – .78
Dry w/HD: .80 – .84; Wet w/HD: .78 – .82
Dura-Kote Polyurethane WB Dry: .64 – .68; Wet: .64 – .66
Dry w/HD: .80 – .84; Wet w/HD: .72 – .84
Dura-Kote Epoxy WB Dry: .96 – .98; Wet: .82 – .86
Dry w/HD: .96 – .98; Wet w/HD: .88 – .90
Dura-Kote PFC-120 Dry: .66 – .72; Wet: .76 – .78
Dry w/HD: .80 – .84; Wet w/HD: .78 – .82
