What Is Sealer Boss Ultra Seal?
Sealer Boss Ultra Seal WBFZ-32 is a water-based, epoxy-infused acrylic sealer for decorative concrete, stamped concrete, and pavers. Its epoxy infused acrylic formula helps protect against water, stains, UV exposure, and weather while allowing moisture vapor to escape. The clear gloss finish enriches surface color without creating an overly shiny appearance. Suitable for both contractors and homeowners, Sealer Boss Ultra Seal can be applied with a pump sprayer and back roller. It is commonly used on driveways, patios, pool decks, walkways, decorative overlays, stained concrete, and other exterior concrete surfaces where surface protection and gloss enhancement are desired.
Key Benefits
-
Water-Based Formula: A water-based sealer for decorative concrete.
-
Epoxy-Infused Acrylic: Combines acrylic and epoxy technologies in a protective coating.
-
Clear Gloss Finish: Enhances concrete color and adds surface gloss.
-
Water & Stain Protection: Helps protect the surface against water and stains.
-
Wear Protection: Helps protect sealed concrete against everyday wear.
-
Roller or Sprayer Application: Can be applied by roller or pump sprayer, following the product instructions.
Specifications
| Specification | Value |
|---|---|
| Brand | Sealer Boss |
| Product Name | Sealer Boss Ultra Seal WBFZ-32 |
| Model | WBFZ-32 |
| Product Type | Water-Based Concrete Sealer |
| Formulation | Water-Based, Epoxy-Infused Acrylic |
| Finish | Clear Gloss |
| Container Sizes |
5 Gallon |
Recommended Applications
Decorative Concrete
-
Stamped concrete
-
Decorative concrete overlays
-
Stained concrete
-
Microtoppings
Surface Types
-
Concrete
-
Pavers
Common Projects
-
Driveways
-
Pool decks
-
Patios
-
Walkways
How to Apply
Follow the manufacturer's application recommendations for best results.
- Prepare the Surface Clean the surface thoroughly and remove dirt, dust, grease, and other contaminants.
- Allow the Surface to Dry Ensure the surface is completely dry before applying the sealer.
- Apply Evenly Apply a thin, even coat using the manufacturer's recommended application method.
- Apply Additional Coats if Needed Apply additional coats only when recommended for the surface and project conditions.
- Allow Proper Curing Allow the sealer to cure before opening the surface to foot or vehicle traffic.
Related Products
Cleaner Boss Concrete Cleaner & Surface Prep
Explore Cleaner Boss for concrete cleaning and surface preparation. Confirm the cleaning procedure required for your WBFZ-32 sealing project before use.
Sealer Boss Krak Attack — Concrete Crack & Spall Repair
Explore Krak Attack for concrete crack and spall repairs. Before sealing repaired areas, confirm coating compatibility, preparation, and cure requirements.
Ultra Seal Boss SBCG-25 — Solvent-Based Concrete Sealer
Considering a solvent-based sealer? Compare SBCG-25 with WBFZ-32 to choose the formulation and application requirements that suit your project.
Frequently Asked Questions
How much WBFZ-32 should I order?
Divide your project’s square footage by the manufacturer’s coverage per gallon, then account for the required coats. Rough or porous surfaces may need more.
Can WBFZ-32 go over an existing sealer?
Confirm compatibility first. Unknown, peeling, or whitening sealers may require removal or additional preparation before recoating.
What if rain is forecast?
Wait for a suitable dry-weather window. Follow the manufacturer’s instructions for keeping the surface dry before and after application.
Will the sealed surface be slippery?
It may be slippery when wet. For pool decks and walkways, confirm the manufacturer’s recommended traction additive and application method.
How should I clean sealed concrete?
Use a cleaner approved for the sealer. Remove dirt and spills regularly, and avoid unapproved chemicals that could damage the finish.
When can I walk or drive on it?
Follow the manufacturer’s separate foot-traffic and vehicle-traffic times. A surface that feels dry may still need more curing time.