CEM Tone Water-Based Acrylic Concrete Stain adds color to concrete and cementitious overlays for interior and exterior projects. Supplied in a 1-gallon container, it can be used on driveways, pool decks, walkways, and decorative concrete surfaces.
Color Options
Choose a color from the selector. Swatches are approximate; the surface, dilution, application method, and sealer can affect the finished color. Test a small area before applying CEM Tone to the whole surface.
Key Benefits
- Water-based acrylic formula: Adds color to concrete and decorative concrete surfaces.
- Interior & exterior use: Suitable for indoor concrete projects, driveways, pool decks, and walkways.
- Overlay compatible: Can be used to color compatible cementitious overlays.
- Color choices: Select a shade to suit your project and test it on the actual surface.
- UV fade protection: Helps limit color fading from sunlight exposure.
Before You Apply
- Check the surface: Identify any existing sealer, paint, or coating and check whether it must be removed.
- Get the application instructions: Contact The Decorative Concrete Store for current preparation, dilution, equipment, and drying requirements.
- Test the color: Test a small area with your intended application method and sealer, where required. Check the dried result before proceeding.
- Allow enough time: Check the waiting periods between coats, before sealing, and before walking or driving on the surface.
Product Specifications
|
Specification |
Details |
|
Product Name |
CEM Tone |
|
Product Type |
Water-Based Acrylic Concrete Stain |
|
Container Size |
1 U.S. Gallon (3.78 L) |
|
Formulation |
Water-Based Acrylic |
|
Use |
Interior & Exterior |
|
Surfaces |
Concrete & Compatible Cementitious Overlays |
Coverage & Quantity Guide
The amount of CEM Tone needed depends on the surface area, concrete porosity, dilution, and number of coats. Rough or absorbent surfaces may require more stain.
For help estimating your order, contact The Decorative Concrete Store with your project’s square footage, surface type, and details of any existing sealer or coating. The estimate should use the manufacturer’s coverage rate and application requirements.
Surface Preparation & Application
- Check the surface. Confirm that CEM Tone is suitable for the concrete or overlay. For previously sealed, painted, or coated surfaces, obtain compatibility and preparation instructions before proceeding.
- Prepare the surface. Follow the manufacturer’s instructions for cleaning, removing contaminants, and achieving the required surface condition.
- Test a small area. Use the intended dilution, application method, and sealer on an inconspicuous area. Approve the dried appearance before full application.
- Mix and dilute as directed. Follow the approved mixing instructions. Add water only if permitted, using the specified amount.
- Apply the stain. Use the approved equipment, application rate, and technique within the specified application conditions.
- Apply additional coats as directed. Follow the required coat count and waiting time between coats.
- Allow to dry and seal where required. Observe the specified drying and sealing intervals. Wait for the approved foot-traffic or vehicle-traffic time before returning the surface to use.
Sealing & Care
Before starting your project, contact The Decorative Concrete Store for CEM Tone’s sealing requirements and care instructions. Ask which sealer is compatible, how long to wait before sealing, and when the finished surface can accept foot or vehicle traffic.
Product Documents
Frequently Asked Questions
Can I stain concrete that already has a sealer?
Check before applying CEM Tone over an existing sealer. Share the sealer’s name with The Decorative Concrete Store so we can help check compatibility and whether removal is needed.
Will the color look like the chart?
The chart shows approximate colors. See Color Options for the factors that affect the finished result.
Should I add water to CEM Tone?
Add water only as directed in the CEM Tone application instructions. Do not dilute it simply to cover more area. Check the mixture required for your surface before starting.
Does CEM Tone need a sealer?
The sealing requirements for your project need to be checked before application. Ask which sealer works with CEM Tone and how long to wait before applying it. Include that sealer in your color test.
How long before I can walk or drive on it?
Use the manufacturer’s waiting times for the stain and any sealer applied over it. Feeling dry is not enough to establish readiness for traffic. Foot-traffic and vehicle-traffic times may differ."