{"product_id":"cem-spar-rc-700-polyaspartic-polyurea-coating","title":"CEM SPAR RC-700 Polyaspartic Polyurea Coating – 70% Solids (2-Gallon Kit)","description":"\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cstrong\u003eCEM SPAR RC-700\u003c\/strong\u003e is a two-component polyaspartic aliphatic polyurea coating that creates a clear, medium-to-high-gloss finish on concrete floors\u003c\/span\u003e\u003cspan\u003e. Its 70% solids formula combines fast drying with resistance to abrasion, impact, wear, chemical splashes and spills, and hot-tire pickup. UV stability also allows RC-700 to be used in areas exposed to sunlight. Designed for professional applications, it is a practical choice for concrete floors that require a durable finish with a faster return to use.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat Is CEM SPAR RC-700?\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eCEM SPAR RC-700 is a two-component polyaspartic aliphatic polyurea coating designed for professional concrete floor applications\u003c\/strong\u003e\u003cspan\u003e. The system uses separate \u003c\/span\u003e\u003cspan\u003ePart A and Part B components\u003c\/span\u003e\u003cspan\u003e, mixed together before application at the specified ratio. With 70% solids by weight, RC-700 cures to a clear, medium-to-high-gloss finish over properly prepared concrete. The polyaspartic formulation combines a relatively short curing cycle with the characteristics required for demanding floor coating applications. RC-700 can be used as a clear finish or tinted with \u003cstrong\u003eCEM Color Pack\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e when a solid-color coating is desired. It is intended for professional use only and should be applied according to the current \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0845\/4537\/2388\/files\/CEM_SPAR_RC-700_Technical_Data_Sheet.pdf\"\u003eTechnical Data Sheet\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eKey Features of CEM SPAR RC-700\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cstrong\u003e70% Solids:\u003c\/strong\u003e\u003cspan\u003e Contains 70% ±1% solids by weight.\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cstrong\u003eFast Curing:\u003c\/strong\u003e\u003cspan\u003e Tack-free in approximately 2–3 hours, with foot traffic in 3–4 hours under typical TDS test conditions.\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cstrong\u003eUV Stability:\u003c\/strong\u003e\u003cspan\u003e Offers UV stability for areas exposed to sunlight.\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cstrong\u003eAbrasion, Impact \u0026amp; Wear Resistance:\u003c\/strong\u003e\u003cspan\u003e Built to handle abrasion, impact, and everyday floor wear.\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cstrong\u003eChemical Resistance:\u003c\/strong\u003e\u003cspan\u003e Resists chemical splashes and spills.\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cstrong\u003eHot-Tire Pickup Resistance:\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003eResists hot-tire pickup on garage and automotive floors.\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cstrong\u003eClear Gloss Finish:\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003eDries to a clear, medium-to-high-gloss appearance.\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cstrong\u003eTintable:\u003c\/strong\u003e\u003cspan\u003e Can be tinted with CEM Color Pack\u003c\/span\u003e\u003cspan\u003e for a solid-color finish.\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhere Can CEM SPAR RC-700 Be Used?\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCEM SPAR RC-700 is recommended for garages, auto service centers, laboratories, cafeterias, and other interior concrete floors that need a fast-curing, high-performance coating.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eGarages\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eRC-700 can be applied to properly prepared concrete garage floors. It resists abrasion and wear, chemical splashes and spills, and hot-tire pickup. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eAuto Service Centers\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eRC-700 is also recommended for concrete floors in auto service centers, where impact, wear, chemical exposure, and vehicle traffic are common. Its quick dry time can shorten the wait before the floor returns to use. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eLaboratories \u0026amp; Cafeterias\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe manufacturer lists laboratories and cafeterias among the recommended applications for RC-700. After curing, the coating leaves a clear, medium-to-high-gloss finish over the prepared concrete. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eOther Interior Concrete Floors\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eRC-700 can also be used on other interior concrete floors that call for fast curing and high coating performance. Concrete must be structurally sound, clean, dry, and properly prepared before application.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eCEM SPAR RC-700 Specifications\u003c\/span\u003e\u003c\/h2\u003e\n\u003cdiv dir=\"ltr\" align=\"left\"\u003e\n\u003ctable style=\"width: 100%; height: 644.282px;\"\u003e\n\u003ccolgroup\u003e \u003ccol width=\"250\" style=\"width: 44.2478%;\"\u003e \u003ccol width=\"365\" style=\"width: 64.6018%;\"\u003e \u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.5938px;\"\u003e\n\u003ctd style=\"height: 35.5938px;\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eSpecification\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"height: 35.5938px;\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTechnical Data\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.5938px;\"\u003e\n\u003ctd style=\"height: 35.5938px;\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eProduct Type\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"height: 35.5938px;\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePolyaspartic aliphatic polyurea\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.5938px;\"\u003e\n\u003ctd style=\"height: 35.5938px;\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eComponents\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"height: 35.5938px;\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTwo component\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.5938px;\"\u003e\n\u003ctd style=\"height: 35.5938px;\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eSolids\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"height: 35.5938px;\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e70% ±1% by weight\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.5938px;\"\u003e\n\u003ctd style=\"height: 35.5938px;\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eMix Ratio\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"height: 35.5938px;\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e1:1 — Part A to Part B\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.5938px;\"\u003e\n\u003ctd style=\"height: 35.5938px;\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePot Life\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"height: 35.5938px;\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e20–30 minutes\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.5938px;\"\u003e\n\u003ctd style=\"height: 35.5938px;\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTack Free\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"height: 35.5938px;\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e2–3 hours\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.5938px;\"\u003e\n\u003ctd style=\"height: 35.5938px;\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFoot Traffic\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"height: 35.5938px;\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e3–4 hours\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.5938px;\"\u003e\n\u003ctd style=\"height: 35.5938px;\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eHeavy Traffic\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"height: 35.5938px;\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e24 hours\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.5938px;\"\u003e\n\u003ctd style=\"height: 35.5938px;\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eRecoat Window\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"height: 35.5938px;\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e2–18 hours\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.5938px;\"\u003e\n\u003ctd style=\"height: 35.5938px;\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eApplication Temperature\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"height: 35.5938px;\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e50°F–80°F\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.5938px;\"\u003e\n\u003ctd style=\"height: 35.5938px;\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eVOC\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"height: 35.5938px;\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eLess than 400 g\/L, mixed Part A + Part B\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.5938px;\"\u003e\n\u003ctd style=\"height: 35.5938px;\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eDry Appearance\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"height: 35.5938px;\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eClear, medium\/high gloss\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.5938px;\"\u003e\n\u003ctd style=\"height: 35.5938px;\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePackaging\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"height: 35.5938px;\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cstrong\u003e\u003c\/strong\u003e2-Gallon Kit: 1 Gallon Part A + 1 Gallon Part B\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 55.1875px;\"\u003e\n\u003ctd style=\"height: 55.1875px;\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eShelf Life\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"height: 55.1875px;\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eUp to 1 year from manufacture date, unopened, stored at room temperature\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.5938px;\"\u003e\n\u003ctd style=\"height: 35.5938px;\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eClean-Up\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"height: 35.5938px;\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eUse xylene\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 55.1875px;\"\u003e\n\u003ctd style=\"height: 55.1875px;\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eProduct Removal\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"height: 55.1875px;\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCommercial paint stripper, diamond grinding, or sandblasting\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eLaboratory data was recorded at approximately 70–72°F and 50% relative humidity. Conditions outside this range may affect these values. Refer to the current CEM SPAR RC-700 Technical Data Sheet before use.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eHow Do You Check Concrete for Moisture Before Applying RC-700?\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eMoisture vapor transmission can cause bubbling or coating failure. The manufacturer describes this basic moisture check:\u003c\/span\u003e\u003c\/p\u003e\n\u003col start=\"1\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eSecure a 4 × 4-foot plastic sheet to the concrete, sealing all edges with tape.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eLeave it in place for 24 hours.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eCheck beneath the sheet for moisture.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eIf moisture is present, perform calcium chloride and relative humidity probe testing to assess vapor emissions before applying the coating.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cspan\u003eA dry result is a preliminary indication, not confirmation that the floor is ready to coat. The concrete must also meet RC-700’s curing, surface preparation, dryness, and application requirements. Follow the current Technical Data Sheet and confirm acceptable moisture-test results with the manufacturer.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eHow Do You Prepare Concrete for CEM SPAR RC-700?\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eConcrete must be structurally sound, clean, and dry before applying CEM SPAR RC-700\u003c\/span\u003e\u003cspan\u003e. New concrete requires at least 28 days to cure. Prepare the surface by shot blasting or diamond grinding; for diamond grinding, use 30-grit or coarser tooling to reach a CSP-2 to CSP-3 profile. Vacuum the floor thoroughly after grinding or blasting.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIf an existing coating is fully bonded but outside the recoat window, sand it with 60–120 grit before applying another coat. Concrete should also be checked for moisture before application. See the current CEM SPAR RC-700 Technical Data Sheet for moisture testing and full preparation instructions.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eHow Do You Mix CEM SPAR RC-700?\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eMix CEM SPAR RC-700 at a 1:1 ratio of Part A to Part B\u003c\/span\u003e\u003cspan\u003e. If mixing less than a full kit, mix each component separately before measuring equal amounts. Combine 1 part Part A with 1 part Part B in a clean container and drill mix for 2–3 minutes.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAvoid creating a vortex while mixing, as this can introduce excess air and moisture into the material. Mix only what can be applied within the 20–30 minute pot life. Do not thin RC-700.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eHow Do You Apply CEM SPAR RC-700?\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eApply CEM SPAR RC-700 with a brush and\/or 3\/8-inch nap shedless roller, working in approximately 4' × 4' sections and maintaining a wet edge. Back-roll immediately after application and avoid puddling or excess material in joints.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFor chip or media broadcast systems, pour RC-700 over the broadcast surface, spread it with a flat flexible squeegee, then back-roll with a 3\/8-inch nap shed-free roller. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eHow Much CEM SPAR RC-700 Do You Need?\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eOne \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003e2-gallon kit\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e includes \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003e1 gallon of Part A and 1 gallon of Part B\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e. The manufacturer publishes these coverage rates:\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003ctable height=\"161\" style=\"width: 100.177%;\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth style=\"width: 59.034%;\"\u003e\u003cspan\u003eApplication\u003c\/span\u003e\u003c\/th\u003e\n\u003cth style=\"width: 40.6082%;\"\u003e\u003cspan\u003ePublished Coverage\u003c\/span\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 59.034%;\"\u003e\u003cspan\u003eFirst coat directly on concrete\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 40.6082%;\"\u003e\u003cspan\u003e200–300 sq. ft. per gallon\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 59.034%;\"\u003e\u003cspan\u003eSecond coat over an existing coating\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 40.6082%;\"\u003e\u003cspan\u003e250–350 sq. ft. per gallon\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 59.034%;\"\u003e\u003cspan\u003eOver media broadcast systems\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 40.6082%;\"\u003e\u003cspan\u003e100–175 sq. ft. per gallon\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eActual coverage varies with surface porosity, texture, broadcast media, and application method. Additional coats require additional material.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBefore calculating how many kits to order, confirm with the manufacturer that these rates apply to mixed Part A + Part B and establish the required number of coats for your project.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eHow Long Does CEM SPAR RC-700 Take to Dry?\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCEM SPAR RC-700 \u003c\/span\u003e\u003cspan\u003eis typically tack-free in 2–3 hours and ready for foot traffic in approximately 3–4 hours.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003cstrong\u003eTack-free:\u003c\/strong\u003e \u003c\/span\u003e\u003cspan\u003e2–3 hours\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFoot traffic:\u003c\/strong\u003e\u003cspan\u003e 3–4 hours\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeavy traffic:\u003c\/strong\u003e\u003cspan\u003e 24 hours\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecoat window: \u003c\/strong\u003e\u003cspan\u003e2–18 hours\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThese times were measured at approximately 70–72°F and 50% relative humidity. Higher temperatures and humidity can shorten cure times, while cooler temperatures and lower humidity can extend them.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eCan CEM SPAR RC-700 Be Tinted?\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. CEM SPAR RC-700 can be tinted with CEM Coatings Systems’ CEM Color Pack for a solid-color finish. Add the CEM Color Pack to Part A and drill mix for 2–3 minutes before combining Parts A and B. The TDS suggests 9–16 oz per gallon for an opaque finish. Test the color first, as more than one coat may be needed for opacity.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eSlip Resistance\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eCEM SPAR RC-700\u003c\/strong\u003e can be slippery when wet. For floors exposed to wet, oily, or greasy conditions, the manufacturer recommends a slip-resistant aggregate such as Surf-Grip.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSelect the traction treatment for the floor’s intended use and follow the manufacturer’s application instructions. Adding an aggregate does not, by itself, establish ADA compliance. The finished surface must meet the applicable accessibility and safety requirements.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat Products Are Used With CEM SPAR RC-700?\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eRC-700 can be paired with CEM Color Pack for color and Surf-Grip when added slip resistance is needed.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003eCEM Color Pack\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCEM Color Pack is used to create a solid-color RC-700 coating. It is mixed into Part A before Parts A and B are combined.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eSurf-Grip\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp data-pm-slice=\"1 1 []\"\u003e\u003cspan\u003eA slip-resistant additive recommended by the manufacturer for RC-700 floors exposed to wet, oily, or greasy conditions. Follow the specified dosage and application instructions.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003ePrecautions \u0026amp; Limitations\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eAllow the product to warm to at least 50°F before application, even though it will not freeze in storage.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eIndoor ventilation:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Provide proper ventilation during application and for hours afterward to remove solvent fumes. Follow the manufacturer’s safety instructions.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eHVAC protection:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Block HVAC ducts before application to prevent solvent fumes from spreading through the building.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eApply as one or two medium-light coats. Do not apply as a single heavy coat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eRC-700 may darken some new and existing concrete slabs. Test in an inconspicuous area first.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDo not thin this product. Improper thinning can cause the coating to delaminate.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSolvent vapors are heavier than air and can travel along the ground toward distant ignition sources, including pilot lights, sparks, and static discharge. Keep the area clear of ignition sources during and after application.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAlways refer to the current \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0845\/4537\/2388\/files\/CEM_SPAR_RC-700_Technical_Data_Sheet.pdf\"\u003eTechnical Data Sheet\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eCEM SPAR RC-700 Technical \u0026amp; Safety Documents\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCEM SPAR RC-700 Technical Data Sheet (TDS)\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIncludes surface preparation, mixing, application, coverage rates, cure and recoat times, limitations, and technical specifications.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0845\/4537\/2388\/files\/CEM_SPAR_RC-700_Technical_Data_Sheet.pdf\"\u003eView Technical Data Sheet (TDS)\u003c\/a\u003e →\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCEM SPAR RC-700 Safety Data Sheet (SDS)\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIncludes handling, personal protective equipment (PPE), first aid, storage, and safety information.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFrequently Asked Questions\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eWhat comes in one RC-700 kit?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eOne 2-gallon kit includes 1 gallon of Part A and 1 gallon of Part B. Each quantity ordered is one complete kit.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eIs RC-700 clear or tinted?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eRC-700 cures clear. For a solid-color finish, the manufacturer specifies CEM Color Pack, added to Part A before combining the components.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eCan I apply RC-700 over an existing coating?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eThe existing coating must be fully bonded and compatible. Follow the preparation instructions, including sanding when outside the recoat window. Confirm compatibility if the existing product is unknown.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eWhat if I miss the recoat window?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eAdditional preparation is required before recoating. Follow the TDS instructions for your surface; smooth coatings and textured broadcast systems require different preparation methods.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eDo wet areas need a traction additive?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eRC-700 can be slippery when wet. The manufacturer recommends a slip-resistant aggregate for floors exposed to wet, oily, or greasy conditions.\u003c\/span\u003e\u003c\/p\u003e","brand":"CEM Coatings Systems","offers":[{"title":"Default Title","offer_id":67448134140132,"sku":"CEM-RC700-1G","price":229.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/4537\/2388\/files\/cem-spar-rc-700-polyaspartic-polyurea-coating_ffcb221c-3698-427a-b7b5-4001dc16b41c.jpg?v=1791087437","url":"https:\/\/shop.decorativeconcretestore.com\/products\/cem-spar-rc-700-polyaspartic-polyurea-coating","provider":"The Decorative Concrete Store","version":"1.0","type":"link"}