Description
SCT-EP™ Epoxy Crack Repair is a two-part concrete product – a traditional epoxy system to effectively treat static cracks in concrete or minimize their return inactive, structural cracks and patching concrete.
Epoxy Concrete Crack Repair and some typical application:
Cracked Concrete Slabs
Damaged Interior Residential Floors
Hairline concrete cracks in large retail centers
Non-structurally damaged exterior concrete
Seals Concrete From Water
Patch Steps Concrete Based
Driveway Repair Service
Older Interior Concrete Floors
Exterior Building Walls and Steps
Residential Living Area Substrates
Fix Cracks in Concrete Driveways and Walkways
Fixing Concrete Floors and Repair Step Repair
Concrete Crack Filler
How Do You Use SureCrete SCT-EP™ Epoxy Crack Treatment?
SCT-EP’s versatility as a crack treatment product allows for a relatively wide ranged in application procedures. However, the main focuses of the treatment process remain the same.
All cracks should be “dressed” appropriately by cleaning out with a “V” blade or “crack chaser” equipped with an electric grinder.
Make sure crack has been cleared of dust and is dry before application of SCT-EP
Mix SCT-EP thoroughly, until mixture is one consistent color, being careful not to mix more than you need.
Prime the “v-joint,” or cleaned out the crack, by brushing the epoxy mixture into the crack making sure it is injected into the crack.
Combine clean, dry, inorganic silica sand with the epoxy mixture to create a thick slurry.
Pour in the mixture and trowel it into the surface. If coming over the top with an overlay, sprinkle some sand over top of the treated crack to help create a better bond with the next coating.
After approximately 8 hours. and the product has set, use a grinder to remove any excess materials to maintain a flat, even surface.
Frequently Asked Questions About SCT-EP Epoxy Concrete Crack Filler
Question: How Far will SCT-EP Epoxy Concrete Crack Filler Go?
Answer: Varies significantly based on application and amount of silica sand filler used. On its own, 1 (3) gallon kit of SCT-EP will fill 0.4 cubic feet. Larger cracks will require far more product than others sign. See TDS for accurate coverage numbers for certain crack sizes.
Question: How long before applying a finished coating to SCT-EP Epoxy Concrete Crack Filler?
Answer: After approximately 8 hours. have passed and you are ready to grind off excess material, the surface is ready to receive a final coating or overlay.
Specifications and Properties of SCT-EP Epoxy Concrete Crack Filler:
AppearanceAmber
Coverage 0.4 cubic foot or 1/8″ X 3/4″ X 600′ crack
VOC Rating 0 g/L
Shelf Life 1 year in original unopened container
Appearance: Amber
