{"title":"Concrete Floor Coatings","description":"\u003cp\u003e\u003cspan\u003eShop CEM concrete floor coatings, including polyaspartic, polyaspartic\/polyurea, and polyurethane products. Compare available kit sizes, cure options, and approved applications. Check each product’s surface preparation, coverage, recoat requirements, and compatibility before selecting your coating system.\u003c\/span\u003e\u003c\/p\u003e","products":[{"product_id":"cem-polyure-cru-860-polyurethane-floor-topcoat","title":"CEM Polyure CRU-860 Clear Gloss Polyurethane Floor Topcoat","description":"\u003cp\u003e\u003cstrong\u003ePolyure CRU-860\u003c\/strong\u003e a H\u003cstrong\u003eigh Gloss\u003c\/strong\u003e, Aliphatic, High Performance, Single Component, Solvent-borne Moisture Cured Polyurethane topcoat which yields a highly light reflective, smooth finish with U.V. Stability and good gloss retention.\u003c\/p\u003e\n\u003cp\u003eCEM’s Polyure CRU-860’s \u003cstrong\u003elong working time\u003c\/strong\u003e, good gloss retention and clarity making it a good choice for aircraft hangar floors, as a gloss topcoat over CEM’s Metallic \u0026amp; Luster coating systems and in moderate traffic environments which desire a high gloss finish.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor solid colors, CEM’s Polyure CRU-860 accepts CEM Color Packs (sold separately).  For a low sheen finish, add \u003cem\u003eCEM’s\u003c\/em\u003e Low Sheen Aluminum Oxide Powder Additive (sold separately).\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eRECOMMENDED AS A FINAL TOPCOAT FOR:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eIndustrial, Commercial \u0026amp; Retail Environments\u003c\/li\u003e\n\u003cli\u003eAircraft Hangar Floors\u003c\/li\u003e\n\u003cli\u003eShowrooms\u003c\/li\u003e\n\u003cli\u003eMuseums\u003c\/li\u003e\n\u003cli\u003ePharmaceutical Floors\u003c\/li\u003e\n\u003cli\u003eInterior Decorative Concrete\u003c\/li\u003e\n\u003cli\u003eCEM Metal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eHIGHLIGHTS:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eGood Gloss Retention \u0026amp; Light Reflectivity\u003c\/li\u003e\n\u003cli\u003eHigh Performance – Improves service life of coating system\n\u003cul\u003e\n\u003cli\u003eAbrasion Resistant – Very Durable\u003c\/li\u003e\n\u003cli\u003eChemical \u0026amp; Stain Resistant\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eV. Stable, Aliphatic Polyurethane\u003c\/li\u003e\n\u003cli\u003eLong Working time\u003c\/li\u003e\n\u003cli\u003eEasy to Clean\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eResistant to Hot Tire Pickup\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eLess Odor than Traditional Solvent-based, Moisture-Cured Polyurethanes\u003c\/li\u003e\n\u003cli\u003eVOC compliant in most regions \u0026lt;99 g\/L\u003c\/li\u003e\n\u003cli\u003eMeets FDA \u0026amp; USDA standards for flooring\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSTORAGE:  \u003c\/strong\u003eIndoors between 55°F (12.7°C) to 95°F (35°C)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSUBSTRATE TEMPERATURE:  \u003c\/strong\u003e55°F (12.7°C) to 95°F (35°C) with 30% to 75% Humidity.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e*Do NOT Apply below 25% Ambient Humidity\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSHELF LIFE: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e6 Months in original, unopened containers;\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUse within 30 days once opened\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eAVAILABLE KIT SIZES: \u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e1 Gallon Jug\u003c\/p\u003e\n\u003cp\u003e5 Gallon Jug\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSHEEN:  \u003c\/strong\u003eGloss;\u003c\/p\u003e\n\u003cp\u003eOptional CEM’s LSA-300\u003c\/p\u003e\n\u003cp\u003eLow Sheen additive (sold separately)\u003c\/p\u003e\n\u003cp\u003e= use 1 jar per gallon (up to 2 lbs. per gallon)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOLOR:  \u003c\/strong\u003eClear, Transparent;\u003c\/p\u003e\n\u003cp\u003eOptional Colors (sold separately)\u003c\/p\u003e\n\u003cp\u003e= 10% to 20% ISC by volume\u003cstrong\u003e\u003cem\u003e  \u003cspan\u003e \u003c\/span\u003e\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"CEM Coatings Systems","offers":[{"title":"5 Gallon","offer_id":50528062701796,"sku":null,"price":1655.15,"currency_code":"USD","in_stock":true},{"title":"1 Gallon","offer_id":50528062734564,"sku":null,"price":311.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/4537\/2388\/files\/cem-polyure-cru-860-clear-gloss-topcoat-1-gallon.jpg?v=1791347042"},{"product_id":"cem-spar-fc-100-fast-cure-uv-polyaspartic","title":"CEM SPAR FC-100 Fast-Cure Polyaspartic Floor Coating","description":"\u003cp\u003e\u003cstrong\u003eCEM SPAR FC-100\u003c\/strong\u003e is a 2-Component one to one, \u003cstrong\u003eFast-Cure, High-Performance, 76% Solids Aliphatic Polyaspartic\u003c\/strong\u003e coating with a gloss finish which yields a Resilient, UV-stable and Abrasion Resistant film with exceptional splash and chemical spill properties for application to a variety of substrates including, but not limited to concrete, wood and metal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCEM SPAR FC-100\u003c\/strong\u003e was developed for ease of use with a convenient equal volume mix ratio and thin consistency plus a\u003cstrong\u003e longer working time than most competitor’s\u003c\/strong\u003e regular curing Polyaspartic products.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCEM SPAR FC-100\u003c\/strong\u003e is an excellent coating system for \u003cem\u003eVinyl Chip\u003c\/em\u003e, \u003cem\u003eColor Quartz\u003c\/em\u003e, \u003cstrong\u003efast return-to-service\u003c\/strong\u003e broadcast shop floors and pigmented applications for Residential, Retail, Commercial or Industrial environments which demand color stability, faster return-to-service and durability.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eRECOMMENDED USES:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eFast Return-to-Service Applications\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eFood \u0026amp; Beverage Floors\u003c\/li\u003e\n\u003cli\u003eForklift traffic areas\u003c\/li\u003e\n\u003cli\u003eManufacturing Areas \u0026amp; Aisleways\u003c\/li\u003e\n\u003cli\u003eDecorative Concrete Systems \u0026amp; Stains\u003c\/li\u003e\n\u003cli\u003eLoading Docks\u003c\/li\u003e\n\u003cli\u003eInstitutional, Retail, Commercial \u0026amp; Residential Environments\u003c\/li\u003e\n\u003cli\u003eSchools \u0026amp; Universities\u003c\/li\u003e\n\u003cli\u003ePharmaceutical Floors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eHIGHLIGHTS:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFor Interior \u0026amp; Exterior Use\u003c\/li\u003e\n\u003cli\u003eLow VOC’s – Less than 2 g\/L\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e– Meets Source Specific Standards Rule 1113 established by AQMD in California\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHighly Durable\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEasy to Clean\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eOvernight Return to Service\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHot Tire Pickup Resistant\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eMeets FDA \u0026amp; USDA standards for floor coatings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eSTORAGE:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eIndoors between 40°F (4.4°C) to 90°F (32.2°C)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSUBSTRATE SURFACE TEMPERATURE:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e40°F (4.4°C) to 85°F (29.4°C) with less than 80% Ambient Humidity\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003cstrong\u003eSHELF LIFE: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e12 Months in original, unopened containers\u003c\/p\u003e\n\u003cp\u003e30 days once opened.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e Sizes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e2- Gallon Kit Gloss\u003c\/p\u003e\n\u003cp\u003e10-Gallon Kit Gloss\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOLORS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCEM Color Packs (sold separately) and Clear\u003c\/b\u003e\u003c\/p\u003e","brand":"CEM Coatings Systems","offers":[{"title":"10 Gallon Kit","offer_id":50528063226084,"sku":null,"price":1695.92,"currency_code":"USD","in_stock":true},{"title":"2 Gallon Kit","offer_id":50528063258852,"sku":null,"price":406.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/4537\/2388\/files\/cem-spar-fc-100-polyaspartic-2-gallon-kit-part-a-b.jpg?v=1791348372"},{"product_id":"cem-spar-rc-200-regular-cure-polyaspartic-topcoat","title":"CEM SPAR RC-200 Regular-Cure Polyaspartic Floor Topcoat","description":"\u003cp\u003e\u003cstrong\u003eCEM SPAR RC-200\u003c\/strong\u003e is a 2-Component, High-Performance, 76% Solids Aliphatic Polyaspartic coating with a gloss finish which yields a Resilient, U.V. Stable and Abrasion Resistant film with exceptional splash and chemical spill properties for application to a variety of substrates including, but not limited to concrete, wood and metal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCEM SPAR RC-200 was developed for ease of use with a 1 to 1 mix ratio plus a longer working time than most competitors Polyaspartic products\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCEM SPAR RC-200 is an excellent coating system for \u003cem\u003eVinyl Chip\u003c\/em\u003e, \u003cem\u003eColor Quartz\u003c\/em\u003e, \u003c\/strong\u003e\u003cem\u003e\u003cstrong\u003eCEM Meta\u003c\/strong\u003el\u003c\/em\u003e, fast return-to-service broadcast shop floors and pigmented applications for Residential, Retail, Commercial or Industrial environments which demand color stability, faster return-to-service and durability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eCEM’s LSA-300 Low Sheen additive\u003c\/em\u003e\u003c\/strong\u003e is available separately to achieve a low sheen finish as a topcoat with CEM SPAR RC-200\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eRECOMMENDED USES:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eFast Return-to-Service Applications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFood \u0026amp; Beverage Floors\u003c\/li\u003e\n\u003cli\u003eForklift traffic areas\u003c\/li\u003e\n\u003cli\u003eManufacturing Areas \u0026amp; Aisleways\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDecorative Concrete Systems \u0026amp; Stains\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eLoading Docks\u003c\/li\u003e\n\u003cli\u003eInstitutional, Retail, Commercial \u0026amp; Residential Environments\u003c\/li\u003e\n\u003cli\u003eSchools \u0026amp; Universities\u003c\/li\u003e\n\u003cli\u003ePharmaceutical Floors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHIGHLIGHTS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor Interior \u0026amp; Exterior Use\u003c\/li\u003e\n\u003cli\u003eLow VOC’s – Less than 2 g\/L\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e– Meets Source Specific Standards Rule 1113 established by AQMD in California\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHighly Durable\u003c\/li\u003e\n\u003cli\u003eEasy to Clean\u003c\/li\u003e\n\u003cli\u003eOvernight Return to Service\u003c\/li\u003e\n\u003cli\u003eHot Tire Pickup Resistant\u003c\/li\u003e\n\u003cli\u003eMeets FDA \u0026amp; USDS standards\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eSTORAGE:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eIndoors between 40°F (4.4°C) to 90°F (32.2°C)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSUBSTRATE SURFACE TEMPERATURE:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e40°F (4.4°C) to 85°F (29.4°C) with less than 80% Ambient Humidity\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003cstrong\u003eSHELF LIFE: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e12 Months in original, unopened containers\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003cstrong\u003ePACKAGING:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e2 Gallon Kit\u003c\/p\u003e\n\u003cp\u003e10 Gallon Kit\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOLORS \u003c\/strong\u003e(sold separately)\u003cstrong\u003e: CEM Color Packs\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eClear\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCURE TIMES:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eHigher temperatures \u0026amp; humidity will shorten pot-life.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eBased on 8 mil wet film thickness, higher build will lengthen the cure time necessary for traffic\u003c\/em\u003e\u003c\/p\u003e\n\u003ctable width=\"592\" height=\"371\" style=\"width: 592px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"101\" style=\"width: 195.531px;\"\u003e\u003cstrong\u003eTemperature \/ Humidity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd width=\"77\" style=\"width: 123.312px;\"\u003e\n\u003cstrong\u003e55°F\u003c\/strong\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e(50% Humidity)\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"74\" style=\"width: 118.844px;\"\u003e\n\u003cstrong\u003e72°F\u003c\/strong\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e(50% Humidity)\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"79\" style=\"width: 126.312px;\"\u003e\n\u003cstrong\u003e85°F\u003c\/strong\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e(50% Humidity)\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"101\" style=\"width: 195.531px;\"\u003e\u003cstrong\u003ePot-Life\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd width=\"77\" style=\"width: 123.312px;\"\u003e60 to 80 min.\u003c\/td\u003e\n\u003ctd width=\"74\" style=\"width: 118.844px;\"\u003e45 minutes\u003c\/td\u003e\n\u003ctd width=\"79\" style=\"width: 126.312px;\"\u003e25 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"101\" style=\"width: 195.531px;\"\u003e\u003cstrong\u003eWorking Time\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd width=\"77\" style=\"width: 123.312px;\"\u003e60 minutes\u003c\/td\u003e\n\u003ctd width=\"74\" style=\"width: 118.844px;\"\u003e45 minutes\u003c\/td\u003e\n\u003ctd width=\"79\" style=\"width: 126.312px;\"\u003e20 to 25 min.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"101\" style=\"width: 195.531px;\"\u003e\u003cstrong\u003eTack Free\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd width=\"77\" style=\"width: 123.312px;\"\u003e4 to 6 hours\u003c\/td\u003e\n\u003ctd width=\"74\" style=\"width: 118.844px;\"\u003e2 to 3 hours\u003c\/td\u003e\n\u003ctd width=\"79\" style=\"width: 126.312px;\"\u003e90 to 120 min.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"101\" style=\"width: 195.531px;\"\u003e\u003cstrong\u003eRecoat Window\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd width=\"77\" style=\"width: 123.312px;\"\u003e6 to 24 hours\u003c\/td\u003e\n\u003ctd width=\"74\" style=\"width: 118.844px;\"\u003e3 to 24 hours\u003c\/td\u003e\n\u003ctd width=\"79\" style=\"width: 126.312px;\"\u003e2 to 24 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"101\" style=\"width: 195.531px;\"\u003e\u003cstrong\u003eFoot Traffic\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd width=\"77\" style=\"width: 123.312px;\"\u003e±16 hours\u003c\/td\u003e\n\u003ctd width=\"74\" style=\"width: 118.844px;\"\u003e±8 hours\u003c\/td\u003e\n\u003ctd width=\"79\" style=\"width: 126.312px;\"\u003e±5 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"101\" style=\"width: 195.531px;\"\u003e\n\u003cstrong\u003eHeavy Traffic \u003c\/strong\u003e\u003cstrong\u003e(Vehicular\/Forklift)\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd width=\"77\" style=\"width: 123.312px;\"\u003e±72 hours\u003c\/td\u003e\n\u003ctd width=\"74\" style=\"width: 118.844px;\"\u003e±36 hours\u003c\/td\u003e\n\u003ctd width=\"79\" style=\"width: 126.312px;\"\u003e±20 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"101\" style=\"width: 195.531px;\"\u003e\u003cstrong\u003eMax. Chemical Resistance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd width=\"77\" style=\"width: 123.312px;\"\u003e6 to 7 days\u003c\/td\u003e\n\u003ctd width=\"74\" style=\"width: 118.844px;\"\u003e3 to 4 days\u003c\/td\u003e\n\u003ctd width=\"79\" style=\"width: 126.312px;\"\u003e±3 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"CEM Coatings Systems","offers":[{"title":"10 Gallon Kit","offer_id":50528063291620,"sku":null,"price":1963.58,"currency_code":"USD","in_stock":true},{"title":"2 Gallon Kit","offer_id":50528063324388,"sku":null,"price":419.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/4537\/2388\/files\/cem-spar-rc-200-polyaspartic-2-gallon-kit-part-a-b.jpg?v=1791348008"},{"product_id":"cem-spar-rc-700-polyaspartic-polyurea-coating","title":"CEM SPAR RC-700 Polyaspartic Polyurea Coating – 70% Solids (2-Gallon Kit)","description":"\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cstrong\u003eCEM SPAR RC-700\u003c\/strong\u003e is a two-component polyaspartic aliphatic polyurea coating that creates a clear, medium-to-high-gloss finish on concrete floors\u003c\/span\u003e\u003cspan\u003e. Its 70% solids formula combines fast drying with resistance to abrasion, impact, wear, chemical splashes and spills, and hot-tire pickup. UV stability also allows RC-700 to be used in areas exposed to sunlight. Designed for professional applications, it is a practical choice for concrete floors that require a durable finish with a faster return to use.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat Is CEM SPAR RC-700?\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eCEM SPAR RC-700 is a two-component polyaspartic aliphatic polyurea coating designed for professional concrete floor applications\u003c\/strong\u003e\u003cspan\u003e. The system uses separate \u003c\/span\u003e\u003cspan\u003ePart A and Part B components\u003c\/span\u003e\u003cspan\u003e, mixed together before application at the specified ratio. With 70% solids by weight, RC-700 cures to a clear, medium-to-high-gloss finish over properly prepared concrete. The polyaspartic formulation combines a relatively short curing cycle with the characteristics required for demanding floor coating applications. RC-700 can be used as a clear finish or tinted with \u003cstrong\u003eCEM Color Pack\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e when a solid-color coating is desired. It is intended for professional use only and should be applied according to the current \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0845\/4537\/2388\/files\/CEM_SPAR_RC-700_Technical_Data_Sheet.pdf\"\u003eTechnical Data Sheet\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eKey Features of CEM SPAR RC-700\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cstrong\u003e70% Solids:\u003c\/strong\u003e\u003cspan\u003e Contains 70% ±1% solids by weight.\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cstrong\u003eFast Curing:\u003c\/strong\u003e\u003cspan\u003e Tack-free in approximately 2–3 hours, with foot traffic in 3–4 hours under typical TDS test conditions.\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cstrong\u003eUV Stability:\u003c\/strong\u003e\u003cspan\u003e Offers UV stability for areas exposed to sunlight.\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cstrong\u003eAbrasion, Impact \u0026amp; Wear Resistance:\u003c\/strong\u003e\u003cspan\u003e Built to handle abrasion, impact, and everyday floor wear.\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cstrong\u003eChemical Resistance:\u003c\/strong\u003e\u003cspan\u003e Resists chemical splashes and spills.\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cstrong\u003eHot-Tire Pickup Resistance:\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003eResists hot-tire pickup on garage and automotive floors.\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cstrong\u003eClear Gloss Finish:\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003eDries to a clear, medium-to-high-gloss appearance.\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cstrong\u003eTintable:\u003c\/strong\u003e\u003cspan\u003e Can be tinted with CEM Color Pack\u003c\/span\u003e\u003cspan\u003e for a solid-color finish.\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhere Can CEM SPAR RC-700 Be Used?\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCEM SPAR RC-700 is recommended for garages, auto service centers, laboratories, cafeterias, and other interior concrete floors that need a fast-curing, high-performance coating.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eGarages\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eRC-700 can be applied to properly prepared concrete garage floors. It resists abrasion and wear, chemical splashes and spills, and hot-tire pickup. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eAuto Service Centers\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eRC-700 is also recommended for concrete floors in auto service centers, where impact, wear, chemical exposure, and vehicle traffic are common. Its quick dry time can shorten the wait before the floor returns to use. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eLaboratories \u0026amp; Cafeterias\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe manufacturer lists laboratories and cafeterias among the recommended applications for RC-700. After curing, the coating leaves a clear, medium-to-high-gloss finish over the prepared concrete. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eOther Interior Concrete Floors\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eRC-700 can also be used on other interior concrete floors that call for fast curing and high coating performance. Concrete must be structurally sound, clean, dry, and properly prepared before application.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eCEM SPAR RC-700 Specifications\u003c\/span\u003e\u003c\/h2\u003e\n\u003cdiv dir=\"ltr\" align=\"left\"\u003e\n\u003ctable style=\"width: 100%; height: 644.282px;\"\u003e\n\u003ccolgroup\u003e \u003ccol width=\"250\" style=\"width: 44.2478%;\"\u003e \u003ccol width=\"365\" style=\"width: 64.6018%;\"\u003e \u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 35.5938px;\"\u003e\n\u003ctd style=\"height: 35.5938px;\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eSpecification\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"height: 35.5938px;\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTechnical Data\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.5938px;\"\u003e\n\u003ctd style=\"height: 35.5938px;\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eProduct Type\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"height: 35.5938px;\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePolyaspartic aliphatic polyurea\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.5938px;\"\u003e\n\u003ctd style=\"height: 35.5938px;\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eComponents\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"height: 35.5938px;\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTwo component\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.5938px;\"\u003e\n\u003ctd style=\"height: 35.5938px;\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eSolids\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"height: 35.5938px;\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e70% ±1% by weight\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.5938px;\"\u003e\n\u003ctd style=\"height: 35.5938px;\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eMix Ratio\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"height: 35.5938px;\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e1:1 — Part A to Part B\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.5938px;\"\u003e\n\u003ctd style=\"height: 35.5938px;\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePot Life\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"height: 35.5938px;\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e20–30 minutes\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.5938px;\"\u003e\n\u003ctd style=\"height: 35.5938px;\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTack Free\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"height: 35.5938px;\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e2–3 hours\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.5938px;\"\u003e\n\u003ctd style=\"height: 35.5938px;\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFoot Traffic\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"height: 35.5938px;\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e3–4 hours\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.5938px;\"\u003e\n\u003ctd style=\"height: 35.5938px;\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eHeavy Traffic\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"height: 35.5938px;\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e24 hours\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.5938px;\"\u003e\n\u003ctd style=\"height: 35.5938px;\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eRecoat Window\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"height: 35.5938px;\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e2–18 hours\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.5938px;\"\u003e\n\u003ctd style=\"height: 35.5938px;\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eApplication Temperature\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"height: 35.5938px;\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e50°F–80°F\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.5938px;\"\u003e\n\u003ctd style=\"height: 35.5938px;\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eVOC\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"height: 35.5938px;\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eLess than 400 g\/L, mixed Part A + Part B\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.5938px;\"\u003e\n\u003ctd style=\"height: 35.5938px;\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eDry Appearance\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"height: 35.5938px;\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eClear, medium\/high gloss\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.5938px;\"\u003e\n\u003ctd style=\"height: 35.5938px;\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePackaging\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"height: 35.5938px;\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cstrong\u003e\u003c\/strong\u003e2-Gallon Kit: 1 Gallon Part A + 1 Gallon Part B\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 55.1875px;\"\u003e\n\u003ctd style=\"height: 55.1875px;\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eShelf Life\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"height: 55.1875px;\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eUp to 1 year from manufacture date, unopened, stored at room temperature\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 35.5938px;\"\u003e\n\u003ctd style=\"height: 35.5938px;\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eClean-Up\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"height: 35.5938px;\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eUse xylene\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 55.1875px;\"\u003e\n\u003ctd style=\"height: 55.1875px;\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eProduct Removal\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"height: 55.1875px;\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCommercial paint stripper, diamond grinding, or sandblasting\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eLaboratory data was recorded at approximately 70–72°F and 50% relative humidity. Conditions outside this range may affect these values. Refer to the current CEM SPAR RC-700 Technical Data Sheet before use.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eHow Do You Check Concrete for Moisture Before Applying RC-700?\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eMoisture vapor transmission can cause bubbling or coating failure. The manufacturer describes this basic moisture check:\u003c\/span\u003e\u003c\/p\u003e\n\u003col start=\"1\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eSecure a 4 × 4-foot plastic sheet to the concrete, sealing all edges with tape.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eLeave it in place for 24 hours.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eCheck beneath the sheet for moisture.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eIf moisture is present, perform calcium chloride and relative humidity probe testing to assess vapor emissions before applying the coating.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cspan\u003eA dry result is a preliminary indication, not confirmation that the floor is ready to coat. The concrete must also meet RC-700’s curing, surface preparation, dryness, and application requirements. Follow the current Technical Data Sheet and confirm acceptable moisture-test results with the manufacturer.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eHow Do You Prepare Concrete for CEM SPAR RC-700?\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eConcrete must be structurally sound, clean, and dry before applying CEM SPAR RC-700\u003c\/span\u003e\u003cspan\u003e. New concrete requires at least 28 days to cure. Prepare the surface by shot blasting or diamond grinding; for diamond grinding, use 30-grit or coarser tooling to reach a CSP-2 to CSP-3 profile. Vacuum the floor thoroughly after grinding or blasting.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIf an existing coating is fully bonded but outside the recoat window, sand it with 60–120 grit before applying another coat. Concrete should also be checked for moisture before application. See the current CEM SPAR RC-700 Technical Data Sheet for moisture testing and full preparation instructions.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eHow Do You Mix CEM SPAR RC-700?\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eMix CEM SPAR RC-700 at a 1:1 ratio of Part A to Part B\u003c\/span\u003e\u003cspan\u003e. If mixing less than a full kit, mix each component separately before measuring equal amounts. Combine 1 part Part A with 1 part Part B in a clean container and drill mix for 2–3 minutes.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAvoid creating a vortex while mixing, as this can introduce excess air and moisture into the material. Mix only what can be applied within the 20–30 minute pot life. Do not thin RC-700.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eHow Do You Apply CEM SPAR RC-700?\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eApply CEM SPAR RC-700 with a brush and\/or 3\/8-inch nap shedless roller, working in approximately 4' × 4' sections and maintaining a wet edge. Back-roll immediately after application and avoid puddling or excess material in joints.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFor chip or media broadcast systems, pour RC-700 over the broadcast surface, spread it with a flat flexible squeegee, then back-roll with a 3\/8-inch nap shed-free roller. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eHow Much CEM SPAR RC-700 Do You Need?\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eOne \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003e2-gallon kit\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e includes \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003e1 gallon of Part A and 1 gallon of Part B\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e. The manufacturer publishes these coverage rates:\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003ctable height=\"161\" style=\"width: 100.177%;\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth style=\"width: 59.034%;\"\u003e\u003cspan\u003eApplication\u003c\/span\u003e\u003c\/th\u003e\n\u003cth style=\"width: 40.6082%;\"\u003e\u003cspan\u003ePublished Coverage\u003c\/span\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 59.034%;\"\u003e\u003cspan\u003eFirst coat directly on concrete\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 40.6082%;\"\u003e\u003cspan\u003e200–300 sq. ft. per gallon\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 59.034%;\"\u003e\u003cspan\u003eSecond coat over an existing coating\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 40.6082%;\"\u003e\u003cspan\u003e250–350 sq. ft. per gallon\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 59.034%;\"\u003e\u003cspan\u003eOver media broadcast systems\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 40.6082%;\"\u003e\u003cspan\u003e100–175 sq. ft. per gallon\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eActual coverage varies with surface porosity, texture, broadcast media, and application method. Additional coats require additional material.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBefore calculating how many kits to order, confirm with the manufacturer that these rates apply to mixed Part A + Part B and establish the required number of coats for your project.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eHow Long Does CEM SPAR RC-700 Take to Dry?\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCEM SPAR RC-700 \u003c\/span\u003e\u003cspan\u003eis typically tack-free in 2–3 hours and ready for foot traffic in approximately 3–4 hours.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003cstrong\u003eTack-free:\u003c\/strong\u003e \u003c\/span\u003e\u003cspan\u003e2–3 hours\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFoot traffic:\u003c\/strong\u003e\u003cspan\u003e 3–4 hours\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeavy traffic:\u003c\/strong\u003e\u003cspan\u003e 24 hours\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecoat window: \u003c\/strong\u003e\u003cspan\u003e2–18 hours\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThese times were measured at approximately 70–72°F and 50% relative humidity. Higher temperatures and humidity can shorten cure times, while cooler temperatures and lower humidity can extend them.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eCan CEM SPAR RC-700 Be Tinted?\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eYes. CEM SPAR RC-700 can be tinted with CEM Coatings Systems’ CEM Color Pack for a solid-color finish. Add the CEM Color Pack to Part A and drill mix for 2–3 minutes before combining Parts A and B. The TDS suggests 9–16 oz per gallon for an opaque finish. Test the color first, as more than one coat may be needed for opacity.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eSlip Resistance\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eCEM SPAR RC-700\u003c\/strong\u003e can be slippery when wet. For floors exposed to wet, oily, or greasy conditions, the manufacturer recommends a slip-resistant aggregate such as Surf-Grip.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSelect the traction treatment for the floor’s intended use and follow the manufacturer’s application instructions. Adding an aggregate does not, by itself, establish ADA compliance. The finished surface must meet the applicable accessibility and safety requirements.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat Products Are Used With CEM SPAR RC-700?\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eRC-700 can be paired with CEM Color Pack for color and Surf-Grip when added slip resistance is needed.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003eCEM Color Pack\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCEM Color Pack is used to create a solid-color RC-700 coating. It is mixed into Part A before Parts A and B are combined.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eSurf-Grip\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp data-pm-slice=\"1 1 []\"\u003e\u003cspan\u003eA slip-resistant additive recommended by the manufacturer for RC-700 floors exposed to wet, oily, or greasy conditions. Follow the specified dosage and application instructions.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003ePrecautions \u0026amp; Limitations\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eAllow the product to warm to at least 50°F before application, even though it will not freeze in storage.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eIndoor ventilation:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Provide proper ventilation during application and for hours afterward to remove solvent fumes. Follow the manufacturer’s safety instructions.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eHVAC protection:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Block HVAC ducts before application to prevent solvent fumes from spreading through the building.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eApply as one or two medium-light coats. Do not apply as a single heavy coat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eRC-700 may darken some new and existing concrete slabs. Test in an inconspicuous area first.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDo not thin this product. Improper thinning can cause the coating to delaminate.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSolvent vapors are heavier than air and can travel along the ground toward distant ignition sources, including pilot lights, sparks, and static discharge. Keep the area clear of ignition sources during and after application.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAlways refer to the current \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0845\/4537\/2388\/files\/CEM_SPAR_RC-700_Technical_Data_Sheet.pdf\"\u003eTechnical Data Sheet\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eCEM SPAR RC-700 Technical \u0026amp; Safety Documents\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCEM SPAR RC-700 Technical Data Sheet (TDS)\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIncludes surface preparation, mixing, application, coverage rates, cure and recoat times, limitations, and technical specifications.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0845\/4537\/2388\/files\/CEM_SPAR_RC-700_Technical_Data_Sheet.pdf\"\u003eView Technical Data Sheet (TDS)\u003c\/a\u003e →\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCEM SPAR RC-700 Safety Data Sheet (SDS)\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIncludes handling, personal protective equipment (PPE), first aid, storage, and safety information.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFrequently Asked Questions\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eWhat comes in one RC-700 kit?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eOne 2-gallon kit includes 1 gallon of Part A and 1 gallon of Part B. Each quantity ordered is one complete kit.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eIs RC-700 clear or tinted?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eRC-700 cures clear. For a solid-color finish, the manufacturer specifies CEM Color Pack, added to Part A before combining the components.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eCan I apply RC-700 over an existing coating?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eThe existing coating must be fully bonded and compatible. Follow the preparation instructions, including sanding when outside the recoat window. Confirm compatibility if the existing product is unknown.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eWhat if I miss the recoat window?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eAdditional preparation is required before recoating. Follow the TDS instructions for your surface; smooth coatings and textured broadcast systems require different preparation methods.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eDo wet areas need a traction additive?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eRC-700 can be slippery when wet. The manufacturer recommends a slip-resistant aggregate for floors exposed to wet, oily, or greasy conditions.\u003c\/span\u003e\u003c\/p\u003e","brand":"CEM Coatings Systems","offers":[{"title":"Default Title","offer_id":67448134140132,"sku":"CEM-RC700-1G","price":229.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/4537\/2388\/files\/cem-spar-rc-700-polyaspartic-polyurea-coating_ffcb221c-3698-427a-b7b5-4001dc16b41c.jpg?v=1791087437"},{"product_id":"cem-epix-mvb-150-moisture-vapor-barrier-epoxy","title":"CEM EPIX MVB-150 Moisture Vapor Barrier Epoxy – 3-Gallon Kit","description":"\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCEM EPIX MVB-150 Moisture Vapor Barrier Epoxy\u003c\/span\u003e\u003cspan\u003e is a two-component concrete primer designed to reduce moisture vapor transmission beneath approved epoxy and urethane coatings. The \u003c\/span\u003e\u003cspan\u003e3-gallon kit contains 2 gallons of Part A and 1 gallon of Part B\u003c\/span\u003e\u003cspan\u003e, mixed at a \u003c\/span\u003e\u003cspan\u003e2:1 ratio by volume\u003c\/span\u003e\u003cspan\u003e. Before application, confirm that the concrete’s moisture conditions and surface preparation meet the manufacturer’s requirements. \u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eSuitable Applications \u0026amp; Restrictions\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCEM EPIX MVB-150 is intended for properly prepared concrete floors where moisture vapor transmission is a concern.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv dir=\"ltr\" align=\"left\"\u003e\n\u003ctable\u003e\n\u003ccolgroup\u003e\n\u003ccol width=\"99\"\u003e\n\u003ccol width=\"361\"\u003e\n\u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eSetting\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eApplication examples\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eResidential\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eGarages and basements\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eCommercial\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eShowrooms and retail floors\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eIndustrial\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWarehouses, aircraft hangars, and auto service centers\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eMoisture suitability:\u003c\/span\u003e\u003cspan\u003e Not recommended for surfaces with excessive moisture. Before use, obtain the manufacturer’s required moisture test methods and acceptance limits, and confirm that your concrete meets them.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eConfirm surface preparation requirements and compatibility with your planned coating system before application.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eKey Benefits\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cspan\u003eMoisture vapor control:\u003c\/span\u003e\u003cspan\u003e Designed to reduce moisture vapor transmission through properly prepared concrete.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cspan\u003eConcrete adhesion:\u003c\/span\u003e\u003cspan\u003e Bonds to suitable concrete surfaces where moisture vapor is a concern.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cspan\u003eHigh-solids formula:\u003c\/span\u003e\u003cspan\u003e Contains 100% solids by weight.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cspan\u003eBase for floor coatings:\u003c\/span\u003e\u003cspan\u003e Serves as a primer beneath approved epoxy and urethane systems.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eProduct Specifications\u003c\/span\u003e\u003c\/h2\u003e\n\u003cdiv dir=\"ltr\" align=\"left\"\u003e\n\u003ctable\u003e\n\u003ccolgroup\u003e\n\u003ccol width=\"204\"\u003e\n\u003ccol width=\"361\"\u003e\n\u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eDetails\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eProduct\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCEM EPIX MVB-150\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTwo-component moisture-vapor-control epoxy primer\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eColor\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eClear — no tint\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003ePart A Size\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e2 U.S. gallons (7.57 L)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003ePart B Size\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e1 U.S. gallon (3.78 L)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eMix Ratio\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e2 parts A to 1 part B \u003c\/span\u003e\u003cspan\u003eby volume\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eSolids by Weight\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e100%\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eVOC — Mixed Parts A \u0026amp; B\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e0 g\/L\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eApplication Temperature\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e50°F–80°F\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003ePot Life at 77°F\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e20 minutes\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eCoverage\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe technical sheet lists \u003c\/span\u003e\u003cspan\u003e125–175 square feet per gallon\u003c\/span\u003e\u003cspan\u003e, depending on surface porosity, texture, and application method. Before calculating your order, confirm whether this rate refers to mixed epoxy, the required film thickness, and the number of coats.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv dir=\"ltr\" align=\"left\"\u003e\n\u003ctable\u003e\n\u003ccolgroup\u003e\n\u003ccol width=\"330\"\u003e\n\u003ccol width=\"158\"\u003e\n\u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eListed coverage\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eFirst coat on concrete\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e125–175 ft² per gallon\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eSecond coat over an approved existing coating\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e125–175 ft² per gallon\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cb\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eSurface Preparation \u0026amp; Application Overview\u003c\/span\u003e\u003c\/h2\u003e\n\u003col\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cstrong\u003eCheck concrete moisture.\u003c\/strong\u003e\u003cspan\u003e Confirm the required test methods and acceptable results with the manufacturer. MVB-150 is not recommended for surfaces with excessive moisture.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cstrong\u003ePrepare the surface.\u003c\/strong\u003e\u003cspan\u003e Follow the manufacturer’s required preparation method and concrete surface profile. Leave the surface clean, dry, and free of contaminants. Confirm the required film thickness and coat count before mixing. \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cstrong\u003eMix the components separately.\u003c\/strong\u003e\u003cspan\u003e Mix Part A and Part B individually before combining them.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cstrong\u003eMeasure and combine.\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003eUse \u003c\/span\u003e\u003cspan\u003e2 parts A to 1 part B by volume\u003c\/span\u003e\u003cspan\u003e. Mix for \u003c\/span\u003e\u003cspan\u003e2–3 minutes\u003c\/span\u003e\u003cspan\u003e with a low-speed drill mixer at \u003c\/span\u003e\u003cspan\u003e300–450 rpm\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cstrong\u003eApply immediately.\u003c\/strong\u003e\u003cspan\u003e Pour onto the concrete and spread with a flat squeegee or roller. The listed pot life is \u003c\/span\u003e\u003cspan\u003e20 minutes at 77°F\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cstrong\u003eKeep a wet edge.\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003eSpread evenly at the approved application rate and avoid excessive buildup.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cstrong\u003eApply the next coating.\u003c\/strong\u003e\u003cspan\u003e Use a manufacturer-approved topcoat within its specified application window. If that window is missed, obtain the required preparation instructions before proceeding. \u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eApply within the listed \u003c\/span\u003e\u003cspan\u003e50°F–80°F\u003c\/span\u003e\u003cspan\u003e range. Read the current TDS and SDS for both components before use.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWorking, Recoating \u0026amp; Traffic Times\u003c\/span\u003e\u003c\/h2\u003e\n\u003cdiv dir=\"ltr\" align=\"left\"\u003e\n\u003ctable\u003e\n\u003ccolgroup\u003e\n\u003ccol width=\"123\"\u003e\n\u003ccol width=\"95\"\u003e\n\u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eStage\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eListed time\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003ePot Life at 77°F\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e20 minutes\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eTack-Free\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e10–14 hours\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eRecoat Window\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e12–24 hours\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eFoot Traffic\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e20–24 hours\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eHeavy Traffic\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e4–7 days\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eConfirm the conditions for these times with the manufacturer; only pot life is explicitly stated at \u003c\/span\u003e\u003cspan\u003e77°F\u003c\/span\u003e\u003cspan\u003e. Tack-free does not mean ready for traffic or fully cured.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIf you miss the recoat window:\u003c\/span\u003e\u003cspan\u003e Confirm the required surface preparation before recoating. Also check the approved application window for your selected topcoat.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBefore returning the floor to use:\u003c\/span\u003e\u003cspan\u003e Follow the traffic times for the complete coating system, including any topcoat. Vehicle-traffic and full-cure times are not separately specified in the supplied sheet.\u003c\/span\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eSafety \u0026amp; Storage\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cstrong\u003eProfessional use only:\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003eRead the technical data sheet and both components’ safety data sheets before mixing or application. \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cstrong\u003eVentilation:\u003c\/strong\u003e\u003cspan\u003e Use only in well-ventilated areas.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cstrong\u003eProtective equipment:\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003eAvoid skin and eye contact. Wear appropriate gloves and eye protection, and follow each component’s SDS for additional PPE requirements.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cstrong\u003eStorage:\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003eStore above \u003c\/span\u003e\u003cspan\u003e40°F\u003c\/span\u003e\u003cspan\u003e and keep out of children’s reach.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv style=\"text-align: -webkit-left;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0845\/4537\/2388\/files\/cem-epix-mvb-150-epoxy-technical-data-sheet.jpg?v=1792037076\" alt=\"CEM EPIX MVB-150 technical data sheet showing specifications, coverage, mixing instructions, and precautions.\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/div\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eFrequently Asked Questions\u003c\/span\u003e\u003c\/h3\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan I use MVB-150 on concrete with moisture problems?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eMVB-150 is designed to reduce moisture vapor transmission but is not recommended for surfaces with excessive moisture. Confirm the required moisture tests and acceptable results with the manufacturer before use.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhich coatings can go over MVB-150?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eMVB-150 is a base for approved epoxy and urethane systems. Check compatibility and the application window for the specific topcoat you plan to use.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan I mix part of the kit?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eConfirm that partial-kit mixing is permitted. The specified ratio is \u003c\/span\u003e\u003cspan\u003e2 parts A to 1 part B by volume\u003c\/span\u003e\u003cspan\u003e. Follow the manufacturer’s partial-batch instructions and measure accurately.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan I leave MVB-150 exposed as the finished floor?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eMVB-150 is described as a primer beneath coating systems. The supplied sheet does not confirm use as a finished floor. Obtain manufacturer approval before leaving it without a topcoat.\u003c\/span\u003e\u003c\/p\u003e","brand":"CEM Coatings Systems","offers":[{"title":"Default Title","offer_id":67582241046756,"sku":null,"price":229.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/4537\/2388\/files\/cem-epix-mvb-150-moisture-vapor-barrier-epoxy-kit.jpg?v=1792036939"},{"product_id":"cem-epix-fc-360-epoxy-floor-basecoat","title":"CEM EPIX FC-360 High-Solids Epoxy Basecoat – 3-Gallon Kit","description":"\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCEM EPIX FC-360 High-Solids Epoxy Basecoat\u003c\/span\u003e\u003cspan\u003e is a two-component epoxy for properly prepared concrete floors beneath decorative flake, metallic, and solid-color flooring systems. Suitable projects include garages, showrooms, warehouses, and retail floors. Part A comes in a \u003c\/span\u003e\u003cspan\u003e2-gallon container\u003c\/span\u003e\u003cspan\u003e and Part B in a \u003c\/span\u003e\u003cspan\u003e1-gallon container\u003c\/span\u003e\u003cspan\u003e. Mix \u003c\/span\u003e\u003cspan\u003e2 parts A to 1 part B by volume\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eSuitable Applications \u0026amp; Restrictions\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eUse CEM EPIX FC-360 as a basecoat on properly prepared concrete floors.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv dir=\"ltr\" align=\"left\"\u003e\n\u003ctable\u003e\n\u003ccolgroup\u003e\n\u003ccol width=\"151\"\u003e\n\u003ccol width=\"463\"\u003e\n\u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eCategory\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eDetails\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eProject examples\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eGarages, warehouses, showrooms, retail floors, aircraft hangars, and auto service centers.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eSurface preparation\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eConcrete must be clean, dry, and free of contaminants. Follow the manufacturer’s preparation instructions.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eMoisture restrictions\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNot recommended for surfaces with excessive moisture. Obtain CEM Coating Systems’ required moisture tests and acceptance limits, and confirm that the concrete meets them before application.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eExisting coatings and other substrates\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eConfirm compatibility and required preparation with CEM Coating Systems before use.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eColor Options\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eChoose your basecoat color from the available options.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eSwatches are approximate. Flakes, metallic pigments, and the topcoat can affect how the finished floor looks. Review a finished sample of your chosen flooring system before ordering.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eKey Features \u0026amp; Benefits\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cspan\u003eConcrete adhesion:\u003c\/span\u003e\u003cspan\u003e Bonds to properly prepared concrete floors.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cspan\u003eHigh-solids formula:\u003c\/span\u003e\u003cspan\u003e Two-component, cycloaliphatic amine epoxy.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cspan\u003eDecorative flooring basecoat:\u003c\/span\u003e\u003cspan\u003e Forms the base layer beneath compatible decorative floor coatings.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cspan\u003eFast curing:\u003c\/span\u003e\u003cspan\u003e Listed tack-free time is \u003c\/span\u003e\u003cspan\u003e3–4 hours\u003c\/span\u003e\u003cspan\u003e. Follow the separate recoating and traffic requirements\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eProduct Specifications\u003c\/span\u003e\u003c\/h2\u003e\n\u003cdiv dir=\"ltr\" align=\"left\"\u003e\n\u003ctable\u003e\n\u003ccolgroup\u003e\n\u003ccol width=\"188\"\u003e\n\u003ccol width=\"313\"\u003e\n\u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eDetails\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eProduct\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCEM EPIX FC-360\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eProduct Type\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTwo-component epoxy floor basecoat\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFormulation\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eHigh-solids, cycloaliphatic amine epoxy\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePackage Contents\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e3-gallon kit: 2 gallons Part A + 1 gallon Part B\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eMix Ratio\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e2 parts A to 1 part B by volume\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFinish\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eHigh gloss\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eMixed VOC\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eLess than 100 g\/L\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eApplication Temperature\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e50°F–80°F\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePot Life\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e20 minutes at 77°F\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIntended Use\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eProfessional use only\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eCoverage\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe technical sheet lists \u003c\/span\u003e\u003cspan\u003e125–175 square feet per gallon\u003c\/span\u003e\u003cspan\u003e. Actual coverage varies with concrete porosity, surface texture, application method, and existing coatings.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv dir=\"ltr\" align=\"left\"\u003e\n\u003ctable\u003e\n\u003ccolgroup\u003e\n\u003ccol width=\"332\"\u003e\n\u003ccol width=\"158\"\u003e\n\u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eListed Coverage\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFirst coat on concrete\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e125–175 ft² per gallon\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eSecond coat over a compatible existing coating\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e125–175 ft² per gallon\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBefore calculating your order, confirm with CEM Coating Systems whether this rate applies to mixed Part A and Part B, the required film thickness, and the number of coats. Coverage for other components in the flooring system must be calculated separately.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eSurface Preparation \u0026amp; Application Overview\u003c\/span\u003e\u003c\/h2\u003e\n\u003col\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cspan\u003eAssess the concrete.\u003c\/span\u003e\u003cspan\u003e Check its condition and moisture suitability using the manufacturer’s required tests and acceptance limits.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cspan\u003ePrepare the surface. \u003c\/span\u003e\u003cspan\u003eFollow CEM Coating Systems’ required preparation method and concrete surface profile. Leave the surface clean, dry, and free of contaminants. \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cspan\u003eMix each component separately.\u003c\/span\u003e\u003cspan\u003e Mix Part A and Part B individually before combining them.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cspan\u003eCombine and mix.\u003c\/span\u003e\u003cspan\u003e Use \u003c\/span\u003e\u003cspan\u003e2 parts A to 1 part B by volume\u003c\/span\u003e\u003cspan\u003e. Mix for \u003c\/span\u003e\u003cspan\u003e2–3 minutes\u003c\/span\u003e\u003cspan\u003e with a low-speed drill mixer at \u003c\/span\u003e\u003cspan\u003e300–450 rpm\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cspan\u003eApply immediately.\u003c\/span\u003e\u003cspan\u003e Pour the mixed epoxy onto the concrete and spread evenly with a flat squeegee or roller. Avoid excessive buildup. Pot life is \u003c\/span\u003e\u003cspan\u003e20 minutes at 77°F\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cspan\u003eFollow your decorative system’s instructions.\u003c\/span\u003e\u003cspan\u003e For a full-broadcast flake system, broadcast flakes into the wet basecoat to full rejection. Use the specified application sequence for metallic or solid-color systems.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cspan\u003eApply the next coat.\u003c\/span\u003e\u003cspan\u003e Use a manufacturer-approved coating within its specified application window. If the window is missed, obtain the required surface-preparation instructions before proceeding.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eApply within \u003c\/span\u003e\u003cspan\u003e50°F–80°F\u003c\/span\u003e\u003cspan\u003e. Read the current technical sheet and safety data sheets for both components before use.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWorking, Recoating \u0026amp; Traffic Times\u003c\/span\u003e\u003c\/h2\u003e\n\u003cdiv dir=\"ltr\" align=\"left\"\u003e\n\u003ctable\u003e\n\u003ccolgroup\u003e\n\u003ccol width=\"119\"\u003e\n\u003ccol width=\"97\"\u003e\n\u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eStage\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eListed Time\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePot life at 77°F\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e20 minutes\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTack-free\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e3–4 hours\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eRecoat window\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e2–9 hours\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFoot traffic\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e12–16 hours\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eHeavy traffic\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e2–7 days\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eOnly pot life has a stated temperature of \u003c\/span\u003e\u003cspan\u003e77°F\u003c\/span\u003e\u003cspan\u003e. Confirm the conditions for the remaining times before planning application or reopening the floor. Tack-free does not mean fully cured or ready for traffic.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFollow the traffic requirements for the complete coating system, including its topcoat. The listed heavy-traffic time does not establish vehicle-traffic readiness or full cure.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIf the recoat window is missed:\u003c\/span\u003e\u003cspan\u003e Obtain CEM Coating Systems’ surface-preparation instructions before applying another coat. Also check the application window for your selected topcoat.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eSafety \u0026amp; Product Documents\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFor professional use only.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cspan\u003eVentilation:\u003c\/span\u003e\u003cspan\u003e Use only in well-ventilated areas.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cspan\u003eProtective equipment:\u003c\/span\u003e\u003cspan\u003e Wear suitable gloves and goggles. Avoid contact with skin and eyes. Follow each component’s SDS for additional protective equipment.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cspan\u003eStorage:\u003c\/span\u003e\u003cspan\u003e Store above \u003c\/span\u003e\u003cspan\u003e40°F\u003c\/span\u003e\u003cspan\u003e and keep out of children’s reach.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv style=\"text-align: -webkit-left;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0845\/4537\/2388\/files\/cem-epix-fc-360-technical-data-sheet.jpg?v=1792592916\" alt=\"CEM EPIX FC-360 technical data sheet with mixing ratio, coverage, application instructions, and curing times\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/div\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eFrequently Asked Questions\u003c\/span\u003e\u003c\/h3\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan I mix a smaller batch?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eConfirm with CEM Coating Systems that partial-batch mixing is permitted. The specified ratio is \u003c\/span\u003e\u003cspan\u003e2 parts A to 1 part B by volume\u003c\/span\u003e\u003cspan\u003e. Follow the manufacturer’s measuring and mixing instructions.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCan FC-360 be used without a topcoat?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFC-360 is described as a basecoat for decorative flooring systems. The technical sheet does not confirm that it can be left exposed. Obtain manufacturer approval before using it without a topcoat.\u003c\/span\u003e\u003c\/p\u003e","brand":"CEM Coatings Systems","offers":[{"title":"Default Title","offer_id":67713266778340,"sku":null,"price":229.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/4537\/2388\/files\/cem-epix-fc-360-epoxy-basecoat-part-a-part-b.jpg?v=1792592763"}],"url":"https:\/\/shop.decorativeconcretestore.com\/collections\/concrete-floor-coatings.oembed","provider":"The Decorative Concrete Store","version":"1.0","type":"link"}